• Linear Frequency Response: The upper frequencies of the Rage 10" speakers feature a linear, but peaked response of up to 5 dB compared to frequencies below 3kHz, providing an open and uncompressed sound experience.
• High Power Handling: Featuring a nominal impedance of 4 ohms and an RMS power rating of 350W, these speakers deliver powerful and dynamic sound, perfect for upgrading your car audio system.
• Durable Construction: Constructed with a coated paper cone and dual U-shaped cloth surround, these speakers are designed to withstand the rigors of daily use while maintaining optimal performance.
• Enhanced Sensitivity: With a sensitivity of 97.8 dB, these speakers efficiently convert power into sound, delivering loud and clear audio even at lower power levels
• Immersive Sound Experience: Enjoy high-quality audio with a frequency range of 60Hz to 5kHz, providing clear and balanced sound reproduction across a wide spectrum of frequencies.

B2 Audio Pair of Rage 10" 4-Ohm 350W RMS Mid-Range Speakers RAGE10P

This one’s been discontinued, but we’ve got you covered. Check out the B2-RAGE8P.

This Listing Includes:

• (2) B2 Audio Rage 10" Speakers RAGE10P

Most people would crossover their midrange at 4-5 Khz, right where their tweeters would be recommended as well. If thats your settings, then the differences in the frequency range vs the other premium drivers wont be as audible. Still if you prefer a large slope cutoff on your crossovers, meaning a wider overlap of tweeters & midranges, the Rage is superior.







The upper frequencies of the RAGE10 are designed with a linear, but peaked response of up to 5 dB compared to frequencies below 3 KHz. The peak is best described as removing a slightly muffled sound compared to other speakers, the RAGE simply put, is more open and doesnt sound as compressed as pro audio has unfairly gotten a reputation to be.

Technical Specifications:

• Nominal diameter (INCH): 10"


• Nominal Impedance: 4 ohm


• DC resistance: 3.6 ohm


• sensitivity (db 1w/2.83v): 97.8 db


• frequency range (Hz): 60 Hz - 5 KHz


• fs (Hz): 66 Hz (burn in done)


• qes: 0.673


• qms: 8.463


• qts: 0.623


• vas: 15.97 L


• bl: 9.82 TM


• Magnet: 35 oz


• power: 350 w RMS


• voice coil: 3"


• cone material: coated paper


• surround: dual u shaped cloth

• Linear Frequency Response: The upper frequencies of the Rage 10" speakers feature a linear, but peaked response of up to 5 dB compared to frequencies below 3kHz, providing an open and uncompressed sound experience.
• High Power Handling: Featuring a nominal impedance of 4 ohms and an RMS power rating of 350W, these speakers deliver powerful and dynamic sound, perfect for upgrading your car audio system.
• Durable Construction: Constructed with a coated paper cone and dual U-shaped cloth surround, these speakers are designed to withstand the rigors of daily use while maintaining optimal performance.
• Enhanced Sensitivity: With a sensitivity of 97.8 dB, these speakers efficiently convert power into sound, delivering loud and clear audio even at lower power levels
• Immersive Sound Experience: Enjoy high-quality audio with a frequency range of 60Hz to 5kHz, providing clear and balanced sound reproduction across a wide spectrum of frequencies.

B2 Audio Pair of Rage 10" 4-Ohm 350W RMS Mid-Range Speakers RAGE10P

This one’s been discontinued, but we’ve got you covered. Check out the B2-RAGE8P.

This Listing Includes:

• (2) B2 Audio Rage 10" Speakers RAGE10P

Most people would crossover their midrange at 4-5 Khz, right where their tweeters would be recommended as well. If thats your settings, then the differences in the frequency range vs the other premium drivers wont be as audible. Still if you prefer a large slope cutoff on your crossovers, meaning a wider overlap of tweeters & midranges, the Rage is superior.







The upper frequencies of the RAGE10 are designed with a linear, but peaked response of up to 5 dB compared to frequencies below 3 KHz. The peak is best described as removing a slightly muffled sound compared to other speakers, the RAGE simply put, is more open and doesnt sound as compressed as pro audio has unfairly gotten a reputation to be.

Technical Specifications:

• Nominal diameter (INCH): 10"


• Nominal Impedance: 4 ohm


• DC resistance: 3.6 ohm


• sensitivity (db 1w/2.83v): 97.8 db


• frequency range (Hz): 60 Hz - 5 KHz


• fs (Hz): 66 Hz (burn in done)


• qes: 0.673


• qms: 8.463


• qts: 0.623


• vas: 15.97 L


• bl: 9.82 TM


• Magnet: 35 oz


• power: 350 w RMS


• voice coil: 3"


• cone material: coated paper


• surround: dual u shaped cloth