B2 Audio Monoblock Amplifier 2500W 1-Ohm Class-D RGB LED Lights Riot 2500 V2

• 2,500 WATTS RMS AT 1 OHM: Delivers 2,500W RMS at 1 ohm, 1,400W at 2 ohms or 800W at 4 ohms at 14.4V.
• BASS REMOTE INCLUDED: Adjust sub level from the front seat, with a clip indicator built into the remote.
• FULL TUNING CONTROLS: Low pass filter, subsonic filter, 0 to 12 dB bass boost and 0 to 180° phase control
• RGB LED LIGHTING: Built in RGB LED lighting adds a custom look to your amp rack or install.
• BUILT IN PROTECTION: Guards against short circuits, speaker overload, bad input voltage and overheating.

B2 Audio Monoblock Amplifier 2500W 1-Ohm Class-D RGB LED Lights Riot 2500 V2

This Listing Includes

• (1) B2 Audio Riot 2500 RGB V2 Monoblock Amplifier


• (1) Bass Level Control with Clip Indicator

The B2 Audio Riot 2500 RGB V2 is a Hi-EF Class D monoblock built to drive subwoofers with serious power from a compact chassis. At 14.4 volts, it puts out 2,500 watts RMS at 1 ohm, 1,400 watts at 2 ohms and 800 watts at 4 ohms.

It gives you full control over your low end. The low pass filter adjusts from 50 to 250 Hz, the subsonic filter from 10 to 50 Hz, and you get 0 to 12 dB of bass boost plus a 0 to 180 degree phase control to help your subs blend with the rest of your system. The included bass level control lets you adjust output from the driver’s seat, and its clip indicator shows you when you’re pushing the amp too hard.

High level inputs let you connect it to a factory radio without a separate line output converter, and the built in RGB LED lighting adds a clean custom look to your install.

For full rated power, plan on upgrading your electrical system. B2 recommends a dedicated battery for this amp, especially when running it at 1 ohm.

Features

• Dimensions: 13.77" L x 5.43" W x 2.48" H (350 x 138 x 63 mm); measure your mounting spot and leave room for wiring and airflow


• Power input takes 1 gauge wire with a recommended 200A fuse


• Minimum load is 1 ohm; running below that can cause overheating and voids the warranty


• B2 recommends a dedicated AGM battery of at least 150 Ah and 2000 CCA, or a 30 Ah lithium battery (6C), to get full rated power


• The subsonic filter cuts frequencies below your setting, which helps protect subs in ported boxes from over excursion below the box tuning

Specifications

• Brand: B2 Audio


• Series: Riot


• Model: 2500 RGB V2


• Type: Monoblock


• Circuit Configuration: Hi-EF Class D


• RMS Power @ 4 Ohm (14.4V, <1% THD): 800W


• RMS Power @ 2 Ohm (14.4V, <1% THD): 1,400W


• RMS Power @ 1 Ohm (14.4V, <1% THD): 2,500W


• Frequency Response: 10 Hz to 250 Hz


• Signal to Noise Ratio: >90 dB


• Input Sensitivity (RCA): 0.2V to 6V


• High Level Input: 0.6V to 10V


• Crossover Slope: 12 dB/oct


• Low Pass Crossover: 50 Hz to 250 Hz


• Subsonic Filter: 10 Hz to 50 Hz


• Phase: 0 to 180°


• Bass Boost: 0 to 12 dB


• Bass Level Control with Clip: Included


• Power Terminal Gauge: 1 Gauge (42.4 mm²)


• Operational Voltage: 10V to 16V


• Fuse Rating: 200A


• Thermal Protection: Above 75°C (167°F) heatsink temperature


• Dimensions: 13.77" x 5.43" x 2.48" (350 x 138 x 63 mm)

Big sub power and RGB style in a compact monoblock.