B2 Audio DVPE212 1000W Loaded Dual 12" Subwoofer Enclosure w/ Mono Amplifier

• COMPLETE BASS PACKAGE – Includes the B2 Audio DVPE212 Dual 12" Loaded Subwoofer Enclosure and B2 Audio MANI-600 Monoblock Amplifier, delivering a full 1000W RMS system with deep, powerful bass right out of the box.
• ENGINEERED FOR PERFORMANCE – The DVPE212 enclosure is tuned to 35 Hz with dual 90° curved ports, internal bracing, and Acoustilux damping for smooth airflow, accurate response, and tight, controlled lows.
• HEAVY-DUTY CONSTRUCTION – Dual baffles, reinforced slot ports, and corner bracing eliminate flex under heavy load. Designed to fit most trunks with a slanted back for more volume and better airflow.
• CLEAN, EFFICIENT DESIGN – Amplifier controls are hidden behind a removable side panel for a sleek, compact installation while maintaining easy access for tuning.

B2 Audio DVPE212 1000W Loaded Dual 12" Subwoofer Enclosure w/ Mono Amplifier

This listing includes:

• (1) B2 Audio DVPE212 Loaded Enclosure


• (1) B2 Audio MANI-600 Monoblock Amplifier

The B2 Audio DVPE212 isn't just another prefab box - it's a fully engineered enclosure designed to perform like custom work. With features usually reserved for high-end builds, this dual 12" vented enclosure comes pre-loaded with RAVE12 subwoofers and delivers massive output, tight bass response, and long-lasting durability.

Engineered Performance

• Advanced bracing & airflow design - Corner bracing, dual slot ports, and wedged construction eliminate flex and improve sound accuracy.


• Optimized port tuning - Dual 90 curved ports are tuned to 35 Hz for deeper, smoother bass response without chuffing.


• Acoustilux damping - Reduces unwanted resonance, ensuring tight, controlled low-end performance.

Built for Bass Enthusiasts

• Perfect fitment - Designed to span the width of most trunk spaces with an angled back for increased internal volume.


• Wider frequency response - Plays from 25 Hz-200 Hz, giving you both chest-pounding lows and clear midbass.


• Flexible wiring - Run at 1 ohm or 4 ohm to match your amplifier setup.

Heavy-Duty Construction

• Non-pressed coated paper cones with dual 2.5" copper voice coils for strength and heat dissipation.


• Massive motor structure - Four 80 oz magnets per woofer for serious control and excursion.


• No-flex build - Dual baffles, reinforced slot ports, and rigid bracing maximize performance under heavy power.

DVPE212 Specifications

• Frequency Response: 25 Hz - 200 Hz


• Sensitivity: 91 dB


• Impedance: Dual 2 Ohm


• Tuning Frequency: 35 Hz


• Power Handling: 1000W


• Enclosure Volume: 3.05 cu. ft. (86.3 L)


• Port Area: 11.7 in (192 cm)


• Port Length: 6.2"


• Configuration: Dual 12" Loaded (RAVE12)


• Voice Coil: 2.5" Copper


• Magnet: (4) x 80 oz


• Gross Weight: 68 lbs (31 kg)

DVPE212 Dimensions:

• Length: 33"


• Height: 14.96"


• Depth: 16.53"

Don’t be discouraged by the numbers - the MANI-600 is designed to run the DVPE212 enclosure with maximum efficiency. Its high damping factor, clean signal path, and tightly matched impedance curve allow it to deliver far more real-world output than its rated wattage suggests. This amp and enclosure were engineered together for optimal performance, ensuring deep, controlled bass and long-term reliability without wasted power.

Mani 600 Specifications

• RMS Power @ 4 ohm 14.4v <1% THD: 450 W x 1


• RMS Power @ 2 ohm 14.4v <1% THD: 600 W x 1


• RMS Power @ 1 ohm 14.4v <1% THD: 600 W x 1


• Frequency Response: 10 Hz - 500 Hz


• Signal to Noise Ratio: > 90 dB


• Input Sensitivity: 5v ~ 0.35v


• Power Terminal Gauge: 6 Gauge


• Fuse Rating: 70 Amps


• Damping Factor: >400


• High level input: Yes

Mani 600 Crossover Circuit:

• Crossover Circuit: 24 dB / Oct


• Low Pass Crossover: 50 Hz - 500 Hz


• High Pass Crossover: N/A


• Subsonic Crossover: 5 Hz - 40 Hz


• Bandpass Crossover: N/A

Mani 600 Measurements:

• Length: 10.6"


• Width: 6.45"


• Height: 2.28"


• Weight: 3.3 lb