B2 Audio Full Car Audio Package DVPE212 Loaded Enclosure w/ RGB Amplifiers w/ 6.5" Speakers

• Complete System Combo – sub-bass + mids + power amps, all matched for one install. #YouCanNeverB2Loud with this B2 Audio system
• DVPE212 Dual 12" Enclosure – 2000W RMS vented box, tuned for extreme output and reliability
• RIOT 2500.1D RGB Amplifier – delivers 2500W RMS of clean bass power to subs
• RIOT 1800.4D RGB Amplifier – four-channel powerhouse for mids and highs
• (4) RIOT 6P Midrange Speakers – 6.5" high-output mids for vocals & instruments

B2 Audio Full Car Audio Package DVPE212 Loaded Enclosure w/ RGB Amplifiers w/ 6.5" Speakers

This Listing Includes:

• (1) B2 Audio DVPE212 Loaded 12" Subwoofer Enclosure


• (1) B2 Audio RIOT 2500.1D RGB Amplifier


• (1) B2 Audio RIOT 1800.4D RGB Amplifier


• (4) B2 Audio RIOT 6P 6.5" Speakers

The ultimate balance of bass and mids in one powerhouse package. This bundle combines the DVPE212 dual 12" enclosure with the RIOT 2500.1D to drive your subs, the RIOT 1800.4D for crystal-clear midrange, and four RIOT 6P 6.5" speakers to bring your vocals and instruments forward. A complete combo for both daily enjoyment and show builds.

B2-DVPE212 (Enclosure) Specifications:

• Frequency Response: 25 Hz - 200 Hz


• Sensitivity: 91 dB


• Nominal Impedance: Dual 2 Ohm


• Tuning Frequency: 35 Hz


• Power Handling: 1000W RMS / 2000W Max


• Enclosure volume: 3.05 cu. ft / 86.3L


• Port Area: 11.7 Cubic inches / 192 cm


• Port Length: 6.2"


• Configuration: Dual 12"


• Cone Material: Non-Pressed Coated Paper


• Voice Coil Dim: 2.5"


• Voice Coil Material: Copper


• Magnet Weight oz: 4 x 80 Oz


• Gross Weight: 68LB / 31Kg

Dimensions:

• Length: 33"


• Width: 14.96"


• Depth: 16.53"

RIOT 2500.1 (Amplifier) Specifications:

• Continuous Output Power (RMS) @ 4 Ohm 14.4V <1% THD: 800W


• Continuous Output Power (RMS) @ 2 Ohm 14.4V <1% THD: 1400W


• Continuous Output Power (RMS) @ 1 Ohm 14.4V <1% THD: 2500W


• Circuit Configuration: HI-EF Class D


• Frequency Response: 10 Hz - 250 Hz


• Signal to Noise Ratio: >90 DB


• Input Sensitivity: 6 V - 0.2 V


• High Level Input: 10 V - 0.6 V


• Crossover Circuit: 12 DB/OCT


• Low Pass Crossover: 50 Hz - 250 Hz


• Subsonic Crossover: 10 Hz - 50 Hz


• Phase: 0-180 Degrees


• Bass Boost: 0-12 DB


• Level Control with Clip: Included


• Power Terminal Gauge: 1 Gauge


• Operational Voltage: 10 V - 16 V


• Fuse Rating: 200 A

Dimensions:

• Length: 14.57"


• Width: 4.92"


• Depth: 2.24"

RIOT 1800.4 (Amplifier) Specifications:

• Continuous Output Power (RMS) @ 4 Ohm 14.4V <1% THD: 4 x 300W


• Continuous Output Power (RMS) @ 2 Ohm 14.4V <1% THD: 4  x 450W


• Continuous Output Power (RMS) @ 4 Ohm Bridge 14.4V <1% THD: 2 x 900W


• Circuit Configuration: HI-EF Class D


• Frequency Response: 10 Hz - 40 KHz (-3 DB)


• Signal to Noise Ratio: >90 DB


• Input Sensitivity: 6 V - 0.4 V


• High Level Input: 10 V - 0.8 V


• Crossover Circuit: 12 DB/OCT


• Low Pass Crossover: 50 Hz - 5 KHz


• Hi Pass Crossover: 50 Hz - 5 KHz


• Power Terminal Gauge: 1 Gauge


• Operational Voltage: 10 V - 16 V


• Fuse Rating: 150 A

Dimensions:

• Length: 13.82"


• Width: 4.92"


• Height: 2.24"

B2-RIOT6P Midrange Specifications:

• RMS Power Handling: 100W


• Maximum Power Handling: 200W


• Nominal Impedance: 4 Ohm


• Voice Coil Diameter: 1.5" / 38.6 mm


• Magnet Weight: 23 Oz


• Frequency Response: 140 Hz ~ 14 KHz


• Sensitivity: 92 dB

Dimensions:

• Overall Diameter: 6.56" / 168mm


• Mounting Diameter: 6.2" / 158mm


• Front Mount Baffle Cutout: 5.6" / 145mm


• Mounting Depth: 3.3" / 83mm